Ada Cinema Rhapsody Mach II Installation Manual Page 33

  • Download
  • Add to my manuals
  • Print
  • Page
    / 51
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 32
Page 33
Reverb Mode Settings
The Cinema Rhapsody Mach 4 features several
modes that incorporate Reverb. Uniquely, ADA
permits you to fully adjust these modes including
features that permit you to determine the Size of
the affect, the Mix percentage, the Low Frequency
Cut, the Reverb Time and the Damping frequency.
These features can be individually set for each
of the six Reverb modes. Once set, the features
are preserved.
Adjustments are made in real time so that as you
change these settings you can hear the affects of
your adjustments providing that mode is selected
at the time.
ADA has set factory Defaults which can be re-
called at any time. Note that Recalling these
Defaults only recalls the ADA Factory Defaults
for the selected Reverb Mode and will not affect
the other Reverb Modes.
To adjust the settings from the PC Program, select
the side Theater tab and then the top Reverb tab.
Then select the reverb mode you wish to adjust.
From the front of the Cinema Rhapsody Mach
4, while in the Setup Mode, turn the Mode knob
to navigate PRO SETUP and then press the
Mode knob. You are now on the page that reads
LABELS A/V in the upper left-hand corner of
the page. Turn the Mode knob to REVERB and
then press the Mode knob. You are now on the
Reverb screen.
The display’s REVERB line shows the Reverb
mode. Turning the Input knob will scroll through
the six Reverb modes. When you are on the de-
sired Reverb mode, turn the Mode knob to cycle
through its features. While on a feature, turn the
Input knob to adjust the setting.
If you want to reset a Reverb mode to the ADA Facto-
ry default, turn the Mode knob such that the cursor is
DFLT and then press the Mode knob. The current
Reverb mode is now reset to the factory setting.
Other Reverb modes remain unchanged. To exit,
navigate to either PREV (previous screen) or
MAIN (exiting the setup modes screens) using the
Mode knob and then press the Mode knob.
Page view 32
1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 50 51

Comments to this Manuals

No comments